40828854 bids are invited for fire ball with stand , fire ball with stand 1 , 4 kg fire exztinguisher abc type , abc fire extinguisher powder type 6 kg , abc fire extinguisher 2 kg type abc total quantity : 30...
40826165 work contract for refilling, recharging, servicing and testing in thiruverkadu 230kv hgis sswork contract for refilling, recharging, servicing and testing of existing fire extinguishers at thiruverkadu 230 kv hybrid gis substation...
40814599 providing comprehensive maintenance of fire detection & alarm system, public address system, hydrant system & sprinkler system, fire extinguisher system, emergency lighting system, ups system, signage system, closed circuit television system and 65 nos of cctv camera’s with dvr ( digital video recorder ) installed around scheme area in the 1848 msb tngrhs flats ( stilt + 14 floors ) at kavundampalayam, coimbatore district for the month ofdec’23 to mar’24....
40733959 annual maintenance contract for refilling, recharging and testing of various types of fire extinguishers in cedc/north for period of 1 year....
40725378 bids are invited for portable fire extinguishers (v2) as per is 15683:2018 (q2) total quantity : 150...
40723127 bids are invited for recharging of portable fire extinguisher (q3) total quantity : 21...
40721606 bids are invited for portable fire extinguishers (v3) as per bs en standards (q2) total quantity : 100...
40703694 tender for providing fire extinguisher to poonamallee municipal office...
40699422 bids are invited for custom bid for services annual maintenance contract for fire extinguishers available at erode salem coimbatore mettupalayam coonoor depots for a period of one year total quantity :...
40689934 supply of set of layout of notices (braille) for lwaccn coachesset of layout of notices (braille) for lwaccn coaches,set of layout of notices (braille) for lwaccn coaches to drg.no.lwaccn/eog6 4 001, alt g, items 1, 2, 3, 4, 7, 10, 11, 13, 15, 18, 21, 23, & 32 as per spec.icf/md/spec 253,rev 00,amd 02 consists of: 1)notice for door closes automatically, icf/sk3 6 4 051, alt f, item 4 = 2 nos. 2)dust bin notice, icf/sk3 6 4 051, alt f, item 11 = 2 nos. 3)picture: fire extinguisher, lscn/eog 6 4 007, item 1, alt c = 2 nos. 4)notice for duties of coach attendant, icf/sk3 6 4 051, alt f, item 5 = 1 no. 5)picture: no smoking, icf/sk3 6 4 051, alt f, item 15 = 10 nos. 6)picture: soap dispenser, icf/sk3 6 4 051, alt f, item 8 = 4 nos. 7)picture:no drinking water, icf/sk3 6 4 051, alt f, item 2 = 8 nos. 8)picture: no waste into toilets, icf/sk3 6 4 051, alt f, item 3 = 4 nos. 9)western style name plate, icf/sk3 6 4 051, alt f, item 10 = 2 no. 10)number plate (1 to 72) in set,icf/sk3 6 4 052, alt r, col iv = 1 set 11)emergency window notice,icf/sk3 6 4 051, alt f, item 14 = 4 nos. 12)press for flush, icf/sk3 6 4 051, alt f, item 16 = 4 nos. 13)notice for safety message on doors, icf/std 6 4 071, alt d, item 1 = 4 nos. please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key:07236odzqbt1767 [ warranty period: 36 months after the date of delivery ] furnishing depot/icf,chennai, tamil nadu 968.00 set...
40686693 tender for work of fire extinguisher refill / refill with accessories and new items purchase; 1 fire extinguisher refill only.new abc type dcp 06 kgs dry chemical powder. 2 new abc type dcb 09 kgs dry chemical powder. 3 abc dry chemical 25 kgs. 4 abc dry chemical 10 kgs. 5 refill with accessoriescarbon 2 ( co2 ) 22.5 kgs refill and wire braide hose and moving whell. 6 abc dry chemical 5 kgs. refill and wire braide hose. 7 new purchasecarbon 2 ( co2 ) cylinder 9 kgs. 8 abc dry chemical 10 kgs....
40685605 bids are invited for repair services for airfiled specialist vehicles military use al tff fire extinguisher total quantity : 1...
40671809 auction sale of cond. & u/s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, roller shutters, corroded/ dinged/ damaged wagon door, zinc coated fs sheets, base plates, ms/gi sheets in full/cut/damaged/rusted/corroded/crushed condition, wagon floor sheet, coach door ,sliding door of various sorts & sizes, battery boxes, battery box door, collapsible gate, punches plate/ sheet/ screen, corroded shear cutups, roof light/tube light fitting with/without ballast, fl housing, tl patti, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires, chains, boxes, hoop iron, lamps, wall protector, trough sheets, air filter, clips, panels, corroded gi pipes with/without valves, gi duct, ci covers, corroded/ damaged/ dinged condition coach/wagon cutup parts, sheets, equalizing stay, brake anchor, pre cooling outer enclose, corroded round/square pipes, pipe wrench in corroded condition, commode chutes, pins, rivets, bolts, nuts, small iron pieces, wire rope/safety rope with/without aluminium sling, box type fitting, antenna mounting pipes, shell of window ac of various sorts, dust bin, hood, grs box, m.s pipes of various sizes, card rack, bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system, packing strips, battery tray, trough floor sheets, radiator bracket, empty charger without nfs attachments (ferrous) and any other ferrous items of highly corroded nature released from carriage/wagon/loco rolling stocks and all the above items are of various sorts and sizes in full/cut/broken and with/without wooden/glass/ rubber/ fs end fittings with /without minor non ferrous attachments if any in as is where is condition.note: 1) cutting is permitted to loadable size and for heavy nature items only.2) during delivery if any major non ferrous items found the same may be handed over to custodian. pl no.98090800...
40637827 bids are invited for portable fire extinguishers (v2) as per is 15683:2018 (q2) total quantity : 50...
40636890 bids are invited for fire extinguiser fire ball with stand , fire ball with stand 1 , 4 kg fire exztinguisher abc type , abc fire extinguisher powder type 6 kg , abc fire extinguisher 2 kg type abc total quantity : 30...
40630316 tender for empanelment of contractors (furniture/interior, civil & repairs, electrical) and consultants (architects, electrical consultants, civil/structural consultants, structural auditors/ electrical & energy auditors) and manufacturers/ dealers/ suppliers of cctv/fire alarm/burglary alarm/fire extinguishers, air conditioning systems, sign boards & scraps....
40595833 tender for disposal of condemned and scrap materials available at sub stores / p.velur and central stores / nedc / namakkal.; 1 lot no .1 ( lot ofone item ) condemned 22kv distributiontransformer of various capacity w / o oil ( copper wound ) =25 nos 2 lot no .2 ( lot of one item ) condemned 22 kv distributiontransformer various capacity w / o oil ( copper wound ) =25 nos 3 lot no .3 ( lot o f oneitem ) condemned 22 kv distributiontransformer of various capacity w / o oil ( copper wound ) =25 nos 4 lot no .4 ( lot of one item ) condemned 22 kv distributiontransformer of various capacity w / o oil ( copper wound ) =25 nos 5 lot no .5 ( lot of three items ) 1.condemned 22 kv distributiontransformer of various capacity w / o oil ( copper wound ) =21. nos2.condemned distribution transformer 63kva / 11kv w / o oil ( aluminium wound ) =7 nos3.condemned distribution transformer 100kva / 11kv w / o oil ( aluminium wound ) =1 no 6 lot no .6 ( lot of sixteen items ) 1 .m.s miscellaneous iron scrap = 25582 kg2. transformer lamination sheet scrap =2199 kg3. t & p scrap 67kg4. condemned fire extinguishers =10 nos 5. condemned wall coffer = 5 nos 6. condemned weighing balance various capacity ( 1000 kg & 50kg ) =2 nos 7. auto parts scrap =99 kg8. empty barrel 40 / 45 gallon leaky = 51 nos 9. radiator scrap = 1no 10. tube light fitting scrap =33 kg11 . cond.ceiling fan with regulator = 4 nos 12. rail cut bits scrap = 5221 kg13. ms / rts scrap= 4003 kg14. rsj cut bit scrap= 3139 kg15. slater weighing scale 50 kg capacity =1no16.lt ab switch= 10nos 7 lot no .7 ( lot of one item ) 1. acsr scrap = 53740 kgs 8 lot no .8 ( lot of six items ) 1. alu ug cable scrap =737 kg2. aac cut bits scrap = 3909 kg3. aaac scrap= 1275 kg4. alu transformer winding scrap with insulation paper oil soaked = 431 kg5. pvcalu cablescrap = 47 kg6. all aluminium alloy scrap = 13 kg 9 lot no .9 ( lot of twenty three items ) 1. brass scrap = 182 kg2. cond.tong tester = 6 nos3. cond.ltct coil = 9 nos4. cond.volt meter = 1 no5. cond.megger = 4 nos6. cond.cmri meter = 4 nos7. cond.monitor = 40 nos8. cond.computer assecceries = 600 kg9. cond.pedestal fan = 2 nos10. cond.relay of various sizes =7 nos11. cond.hand held device = 66 nos12. cond.ups = 20 nos13. cond.sv / mv lamp fittings = 23 nos14. cond.2kva ups for computer = 11 nos15. cond.phase sequence meter sizes = 1 no16. cond.earth tester = 1 no17. cond.digital clamp meter =1 no18. coil ltct 400 / 5a electr rescring ( new ) = 705 nos19. coil ltct 800 / 5a electr rescring ( new ) = 105 nos20. lt ct coil 150 / 5a ( new ) = 793 nos21. 3 ph 100 120a meter ( sh ) = 2 nos22. cond. type writer =1 no23. gps instrument hand held old version ( new ) = 2 nos 10 lot no .10 ( lot of seven items ) 1. waste paper scrap= 2712kg2. deal wood scrap= 191kg3. pvcscrap = 7 kg4. metering box pilfer proof 2 compartments ( fiber ) = 217 nos5. hut service kit with bulb =646 set6. empty wooden drum ( available at p.velur sub stores ) = 400 nos7. teak wood scrap= 121kg 11 lot no .11 ( lot of three items ) 1. mechanical meter scrap= 9815kg2. hq meter scrap =10538kg3. static meter scrap = 13397kg 12 lot no .12 ( lot of one item ) 1 condemned metering set various sizes w / o oil = 40nos 13 lot no .13 ( lot of one item ) 1 condemmned metering set various sizesw / o oil= 43 nos 14 lot no .14 ( lot of four items ) 1. condemned metering set various sizes w / o oil = 14 nos 2. condemned 110kv ct w / o oil =2 nos 3 condemned 33 / 11 kv ctw / o oil =6 nos 4 condemned 22 kv ctw / o oil= 30 nos 15 lot no .15 ( lot of two items ) 1. condemned station battery =30 nos2. condemned 12v tubular battery =24 nos...
40579052 disposal of scrap and condemned materials available at cedc north coimbatore , lot no.1(lot of two items) 1. scrap rail cut bits 6155 kgs 2. scrap rsj cut bit 3916 kgs , lot no.2(lot of fourteen items) 1. scrap miscellaneous iron 7750 kgs 2. scrap gi 534 kgs 3. scrap transformer lamination sheet 98 kgs 4. cond. fire extinguisher 1 no 5. cond. monitor 7 nos 6. cond. printer 5 nos 7. cond. water filter 1 no 8. cond. chair (computer) 9 nos 9. scrap ms misc scrap 80 kgs 10. scrap gi wire 310 kgs 11. cond. laser printer 1 no 12. scrap auto parts 13 kgs 13. empty steel drum above 6 dia. 15 nos 14. ms barrel 40/45 gln. capacity (leaky) 47 nos , lot no.3(lot of three items) 1. scrap waste paper 7575 kgs 2. scrap teakwood 53 kgs 3. scrap deal wood 20 kgs , lot no.4(lot of three items) 1. scrap ms/rts grill 22486 kgs 2. cond. computer scraps 50 kgs 3. cond. type 3 officer pc 16 set , lot no. 5 (lot of fourteen items) 1. scrap brass 46 kgs 2. energy meter scrap (electro mechanical) 1867 kgs 3. cond. megger of sizes 1 no 4. scrap burnt meter/hq 2628 kgs 5. burnt static meter 9732 kgs 6. cond. relay of sizes 1 no 7. cond. exhaust fan motor (small) 1 no 8. cond. digital micro ohm meter 1 no 9. cond. ct /lt coil 9 nos 10. cond. valve scrap 1 kg 11. cond. motor of various capacity (5hp) 1 no 12. cond.resistant kit 1 kg 13. cond. spilt ac various capacity 1 no 14. cond. window type 2 ton air conditioner with stabilizer 2 nos , lot no. 6(lot of two items) 1. cond. metering set of various capacity w/o oil–29 nos i) 11 kv 20/5a 1 no(apoorv 37062 2018) ii)11 kv 20 10/5a 1 no (crel 121766 2008) iii)11 kv 50/5a 1no(pgr 9220 2019) iv)11 kv 100/5a 1no( vidyuth 9846 2016) v)11 kv 100 50/5a 2 nos 1)vidyuth 453 1505 2007, 2)ae 1664 1996, vi)22 kv 10/5 5a 2 nos 1)ascott 224813 2013, 2)ascott 224799 2015, vii)22 kv 20 10/5a 9 nos 1)ascott 2522 2006, 2)ascott 2003 2005, 3)ascott 2520 2008, 4)crel 121251 2008, 5)crel 120736 2007, 6)ascott 2805 2008, 7)delta 555 2006, 8)ascott 2377 2006, 9)ascott 2840 2008, viii)22 kv 40/5a 2 nos 1)amptech at/22/277 2016, 2)ascott 223823 2012, ix)22 kv 40 20/5a 3 nos1)ascott 3058 2008, 2)crel 121273 2008, 3)ascott 2071 2005, x)22 kv 50/5 5a 1 no 1)crel 127084 2014, xi)22 kv 60 30/5a 3 nos1)elcont 2297/b 3 1997, 2)ascott 223622 2011, 3)crel 121276 2008, xii)22 kv 100 50/5a 3 nos 1)ascott 2669 2008, 2)crel 117904 2004, 3)crel 124170 2011, 2. cond. distribution transformer of various capacityw/o oil (aluminum wound) 10 nos i).200 kva /11 kv – 1 no1) danya dec/600/alu 1989 ii)100 kva /11 kv – 7 nos1) into tech it 17475 1991 2) vijay 9620 1995,3) senthil ad/204/1235 1997 4) indo tech it 13305 1980, 5) ashok 2746 1974 6) vijay 5709 1991,7) jay shree jt – 576 2007 iii)63 kva /11 kv – 2 nos1) venkateswara am/1496/8328 1992 , 2) magdyne 631049 1988 , lot no. 7(lot of six items) 1. scrap aluminum including aac cut bits 79 kgs 2. scrap acsr 8025 kgs 3. scrap aaac 137 kgs 4. scrap aluminum transformer winding 74.950 kgs 5. scrap vir/wp wire with aluminum core 32 kgs 6. scrap all aluminum alloy 19 kgs , lot no. 8(lot of one item) 1. cond. distribution transformer of various capacityw/o oil (copper wound) 30 nos i) 250kva/22kv 2 nos. 1) rel 25025 1936 ,2) rel m 8496 na ii)200kva/22kv – 8 nos 1) rel m 12619 1985 86, 2) hindusthan 3288 1992, 3) danya dec/1271 1994, 4) apex t 035/2350 1970 , 5) indotech it 894 1979,6) hidusthan 3286 1992 , 7)indotech it 8407 1986,8) eltra et 6202 1980. iii)150kva/22kv 1no 1) amul 1947 1970 iv)100kva/22kv 13nos 1) perkure 61251 18 1957, 2) star delta 2075 1970, 3) hindustan 2400 1989, 4) voltamp 62/41 1971, 5) gresham 216850 1950, 6) indo tech it 3318 1980 81, 7) apex t 081/7347 1970 71, 8) eltra t 02/203 1970 , 9) bajaj 1001334 1962, 10)electromech 3171 1996 , 11) rel m 2741 1992 , 12)vigneswara 499 1989,13) hindusthan a 1060 na, v)100kva/11kv 2nos 1) crompton greaves b123/63 1972, 2) volt amp jn 227/46 1971 vi)63kva/22kv 2nos 1) hindusthan 910 1987 , 2) hindusthan 5623 1996 vii)50kva/11kv 2nos 1) kirloskar 50a724/m na , 2) crompton greaves 3522 1967 , lot no. 9(lot of one item) 1. empty wooden drum 3 to 6 dia – 211 nos...
40568484 bids are invited for portable fire extinguishers ( v2 ) as per is 15683:2018 ( q2 ) , fire beaters ( fire suppression hand tools ) ( q3 ) , galvanized mild steel fire bucket ( fire suppression hand tools ) as per is 2546 ( q3 ) total quantity : 248...
40546533 auction sale of lot no: 3 lot name: items consisting of asbestos sheet, fire extinguishers etc...
40509497 bids are invited for repair services for airfiled specialist vehicles military use al tff fire extinguisher (q3) mse total quantity : 1...
40504830 tender for replacement of faulty control panel & topping up of fire extinguishers in te srivilliputhur...
40484173 bids are invited for portable fire extinguishers (v2) as per is 15683:2018 (q2) total quantity : 30...
40484145 bids are invited for charge fire extinguisher defence dry powder 10 kg (dry chemical powder 10 kg) (q3) total quantity : 30...
40469287 tender for refilling of fire extinguisher...
40463349 supply and delivery of battery operated vehicle ( 22 nos ) in perambalur municipality , supply and deliveryof cost of battery operated e cart having three wheels and designed to have a robust construction and intended to provide last mile connected for collection and carrying of municipal solid wastes as per the following technical specification: chassis construction : ladder type welded construction consisting of two symmetrical beams / rails / channels running the length of the cart with transverse cross members connecting them fabricated using crc ms square pipes of suitable size with anti rust proofpowder coating. overall length : 2760mm + 5% tolerance, overall width: 1000mm + 5% tolerance powder : 1500w / 60v dc motor powered. transmission : single central axis differential drive cart movement : both forwared and reverse directions, 1830mm + 10% tolerance, wheel track: 1090mm + 10% tolerance. ground clearance : 160 to 170mm. rear cargo box size ( l * b * h ) : not less than 1400mm x 1000mm x 450mm should be fabricated using ms sheet, ms square pipes with rear foldable single door arrangement both side doors should be made of ms sheet of thickness not less than 0.6mmf ) flooring should be made of ms sheet of thickness not less than 1.6mm.. pay load: not less then 375kgs, speed of vehicle : 25 kms / hr. range per charge: 80 100km per charge .grade ability ( climbing ability ) : 7 degree ( maximum ) . capacity: 30km per charge with charger and adaptor break system: double rear drum type with pedal. seating capacity : 2 person, wheels & tyres : front : 3.75 12 ( 6pr ) 1 no. rear : 3.75 12 ( 6 pr ) 2 nos: spare typeassy 1no.cabin: weather proof complete metal enclosed cabin with windscreen glass ( toughened ) for driver protection with necessary frame structure for protection from heat and rain. suspension : front: heavy duty hydraulic shocker, rear: leaf spring with hydraulic shocker. charger: 15 amp smps charger.accessories: head lamp, speedo meter, fron&rear indicators, fire extinguishers, functional safety by providing circuit breaker ( mcb ) , public addressing system, gps tracking. charging duration: not more than 3 hours. battery capacity : 48 v 100 ah lithium ion battery . warranty for vehicles: the successful bidder should provide one year warranty for vehicles including repair and replacement. warranty for lithium battery: the successful bidder should provide three years warranty for lithium battery. as directed by departmental officers. including all taxex...
40436410 supply of various types of portable trolley mounted fire extinguisher...
40435992 tender for supply of various types of portable trolley mounted fire extinguisher...
40432919 auction sale of cond. & u/s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, roller shutters, corroded/ dinged/ damaged wagon door, zinc coated fs sheets, base plates, ms/gi sheets in full/cut/damaged/rusted/corroded/crushed condition, wagon floor sheet, coach door ,sliding door of various sorts & sizes, battery boxes, battery box door, collapsible gate, punches plate/ sheet/ screen, corroded shear cutups, roof light/tube light fitting with/without ballast, fl housing, tl patti, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires, chains, boxes, hoop iron, lamps, wall protector, trough sheets, air filter, clips, panels, corroded gi pipes with/without valves, gi duct, ci covers, corroded/ damaged/ dinged condition coach/wagon cutup parts, sheets, equalizing stay, brake anchor, pre cooling outer enclose, corroded round/square pipes, pipe wrench in corroded condition, commode chutes, pins, rivets, bolts, nuts, small iron pieces, wire rope/safety rope with/without aluminium sling, box type fitting, antenna mounting pipes, shell of window ac of various sorts, dust bin, hood, grs box, m.s pipes of various sizes, card rack, bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system, packing strips, battery tray, trough floor sheets, radiator bracket, empty charger without nfs attachments (ferrous) and any other ferrous items of highly corroded nature released from carriage/wagon/loco rolling stocks and all the above items are of various sorts and sizes in full/cut/broken and with/without wooden/glass/ rubber/ fs end fittings with /without minor non ferrous attachments if any in as is where is condition.note: 1) cutting is permitted to loadable size and for heavy nature items only.2) during delivery if any major non ferrous items found the same may be handed over to custodian. pl no.98090800...
40417312 auction sale of following materials 27375 e545/23/b005 – 01 bridgeport milling machine – adcock shipley ground floor 1 no 18 1 20000 03 11 2023 at 17:00hrs (5:00p.m) 27376 e545/23/b005 – 02 stebiliser & transformer 12kva 1no, 25kva 2nos, 35kva 2nos, 40kva 1no, 50kva 3nos ground floor 18 1 50000 03 11 2023 at 17:00hrs (5:00p.m) 27377 e545/23/b005 – 03 lgf venus barrel cutting machine – machine no. 181 ground floor 1 no 18 1 5000 03 11 2023 at 17:00hrs (5:00p.m) 27378 e545/23/b005 – 04 surface grinding machine – machine no.8 ground floor 1 no 18 1 5000 03 11 2023 at 17:00hrs (5:00p.m) 27379 e545/23/b005 – 05 25kva spot welding machine – 2sciaky machine no. 101 ground floor 1 no 18 1 5000 03 11 2023 at 17:00hrs (5:00p.m) 27380 e545/23/b005 – 06 small machines – ground floor: laser printing machine – machine no. 148 1no, automal testing machine – machine no. 186 1no, multi value test rig machine no. 191 1no, multi value test rig machine no. 137 1no, safety valve 1no, fly press 1no, eye washing machine 1no, mitutoyo contracer cp 200 1no.surface roughnero testing machine 2nos. mitutoyo surftest sv400 1no, bright dip anodizing chamber 1no. first floor: coil tester 3nos. out side of factory: bench grinder 1no. deburring machine 3nos. machinery parts 1no. hand pallet truck 1no. roof top: air dryer 2nos – machine no. 99 & 100 18 1 25000 03 11 2023 at 17:00hrs (5:00p.m) 27381 e545/23/b005 – 07 atlas air compressor – ga22 motor power 22kw – machine no. 151 ground floor 1 no 18 1 5000 03 11 2023 at 17:00hrs (5:00p.m) 27382 e545/23/b005 – 08 surface table – size 1000x1000mm ground floor 1 no 18 1 3000 03 11 2023 at 17:00hrs (5:00p.m) 27383 e545/23/b005 – 09 jay hind spot welding machine – machine no. 03 ground floor 1 no 18 1 3000 03 11 2023 at 17:00hrs (5:00p.m) 27384 e545/23/b005 – 10 pedestal fan – ground floor: various type 14 nos, scrap room: industrial pedestal fan 4nos 1 lot 18 1 10000 03 11 2023 at 17:00hrs (5:00p.m) 27385 e545/23/b005 – 11 ms/aluminium fabricated/ wooden/pvc materials – ground floor: ms testing tables, side cupboards, file racks, trolleys, small size slotted angle racks, ms grill mesh,compress wooden table mics materials. scrap room: ms tank 1no. pvc spry tank 1lot. out side of factory: pvc bin/pallets/dust bin 4nos – see special condition 1 lot 18 1 25000 03 11 2023 at 17:00hrs (5:00p.m) 27386 e545/23/b005 – 12 die tools 8nos – ground floor, out side of factory two location 1 lot 18 1 10000 03 11 2023 at 17:00hrs (5:00p.m) 27387 e545/22/b002 – 13 fire extinguisher ground floor: 31nos , first floor: 17nos 1 lot 18 1 7500 03 11 2023 at 17:00hrs (5:00p.m) 27388 e545/22/b002 – 14 slotted angle rack – 9 shelves 64nos, 8 shelves 21nos, 4shelves 3nos to be dismantling and removed buy the purchaser at his own cost see special condition 1 lot 18 1 50000 03 11 2023 at 17:00hrs (5:00p.m) 27389 e545/23/b005 – 15 aluminium cable/pipes – ground floor. excluding wall/ceiling hanging cable 1 lot 18 1 15000 03 11 2023 at 17:00hrs (5:00p.m) 27390 e545/23/b005 – 16 electrical scrap: ground floor: such as switches, light fittings, wires, wall clock, fan heads, water dispenser– 4nos, small pedestal fan1no, air blower 1no. first floor: water dispenser– 4nos. water cooler 1no 1 lot 18 1 10000 03 11 2023 at 17:00hrs (5:00p.m) 27391 e545/23/b005 – 17 aluminium /ss components & rods and pneumatic cylinder ground floor 1 lot 18 1 10000 03 11 2023 at 17:00hrs (5:00p.m) 27392 e545/23/b005 – 18 cold room – to be dismantling and removed buy the purchaser at his own cost ground floor see special condition 1 no 18 1 5000 03 11 2023 at 17:00hrs (5:00p.m) 27393 e545/22/b002 – 19 furniture ground floor: tubular pvc chair 45nos. compress wood/pvc revolving chair 11 nos, revolving chair with cushion 42 nos – first floor: reception table 1no, sofa two seater 2nos. single seater 1no, paper stand 1no, teapoy 1no, revolving chair 14nos. ( conference hall ), executive chair 1no. sofa single seater 1no. two seater 1no. teapoy 1no. ( managing director room ), revolving chair with cushion black colour 60 nos. green colour 90nos, paper trays 1lot, server rack 1no, exhibition display stand – 2nos, steel cupboard 5nos. steel coat 1no, condemned chair, testing table 1lot. training hall: revolving chair 18nos, sofa single seater 6nos, ply wood table 1no 1 lot 18 1 25000 03 11 2023 at 17:00hrs (5:00p.m) 27394 e545/23/b005 – 20 ms with stone dinning table 15nos. ms bench 12nos. steel stool 1no. plywood table 1no, alunimum leader 4nos. water dispenser 1no. lunch basket 3nos. ss food warmer 1no.coffee jug 2nos. milk cooker 3nos dust bin 2nos. teapoy 1no dinning hall & executive lunch room 1 lot 18 1 5000 03 11 2023 at 17:00hrs (5:00p.m) 27395 e545/23/b005 – 21 e waste scrap sale limited to parties with valid pcb authorisation to reprocess of e waste 1 lot 18 1 500 03 11 2023 at 17:00hrs (5:00p.m)...
40380975 supply of set of fire extinguisher, set consistsset of fire extinguisher, set consists, set of fire extinguisher, set consists of two items as given below: 1. 2kg co2 fire extinguisher to is 15683 10 nos / set 2. 6kg portable stored pressure type abc type dcp fire extinguisher to is 15683 300 nos / set [ warranty period: 12 months after the date of delivery ] ...
40376161 bids are invited for custom bid for services refilling of fire extinguisher total quantity :...
40350634 auction sale of obsolete articles lying under fci do coimbatore alp empty tins with lids dtm empty drums malathion empty tin locks (u/s) steel chair steel table battery light ceiling fan computer rolling chair inspection sieve unserviceable gunnies executive chair fire buckets malathion empty can alp empty bottle with lid fire extinguisher (co2 type) u/s gunny (sbt 580) u/s gunny(hdpe) fire bucket fire bucket stand lock alp empty bottle alp flask lid malathion empty can dtm container metal tin dtm container plastic steel table small) steel table big) almirah steel water filter wooden box...
40348808 auction for disposal of obsolete articles lying at 03(three) depot under do, coimbatore, divisional office, coimbatore& unserviceable gunnies lying at cwc hosur, tnwc salem, tnwc dharmapuri and silo madukkarai alp empty tins with lids dtm empty drums malathion empty tin locks (u/s) steel chair steel table battery light ceiling fan computer rolling chair inspection sieve unserviceable gunnies fire buckets malathion empty can alp empty bottle with lid fire extinguisher co2 type) u/s gunny sbt 580) u/s gunny(hdpe) etc., ...
40348284 bids are invited for galvanized mild steel fire bucket ( fire suppression hand tools ) as per is 2546 ( q3 ) , portable fire extinguishers ( v2 ) as per is 15683:2018 ( q2 ) , automatic fire ball for fire extinguishing ( q3 ) total quantity : 82...
40322256 auction sale of cond. & u / s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, roller shutters, corroded / dinged / damaged wagon door, zinc coated fs sheets, base plates, ms / gi sheets in full / cut / damaged / rusted / corroded / crushed condition, wagon floor sheet, coach door , sliding door of various sorts & sizes, battery boxes, battery box door, collapsible gate, punches plate / sheet / screen, corroded shear cutups, roof light / tube light fitting with / without ballast, fl housing, tl patti, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover / end shield / guard / blade, pedestal fan guard, air brake pipes, corr. barrels / paint drums, silent block, anchor block, wires, chains, boxes, hoop iron, lamps, wall protector, trough sheets, air filter, clips, panels, corroded gi pipes with / without valves, gi duct, ci covers, corroded / damaged / dinged condition coach / wagon cutup parts, sheets, equalizing stay, brake anchor, pre cooling outer enclose, corroded round / square pipes, pipe wrench in corroded condition, commode chutes, pins, rivets, bolts, nuts, small iron pieces, wire rope / safety rope with / without aluminium sling, box type fitting, antenna mounting pipes, shell of window ac of various sorts, dust bin, hood, grs box, m.s pipes of various sizes, card rack, bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system, packing strips, battery tray, trough floor sheets, radiator bracket, empty charger without nfs attachments ( ferrous ) and any other ferrous items of highly corroded nature released from carriage / wagon / loco rolling stocks and all the above items are of various sorts and sizes in full / cut / broken and with / without wooden / glass / rubber / fs end fittings with / without minor non ferrous attachments if any in as is where is condition.note: 1 ) cutting is permitted to loadable size and for heavy nature items only.2 ) during delivery if any major non ferrous items found the same may be handed over to custodian. pl no.98090800...
40322251 auction sale of p. l. no. 98051301 condemned and unserviceable ferrous headers of radiator cores / inter coolers with bits of copper / brass tube attachments, outer rotors of ecc ( eddy current clutches ) , sewing machines , type writing machines , axle box / bearing housings with bearing, terminal blocks of point motors, centrifugal pump without motor and with / without impeller , rotary key transmitter , sm slides .distributor valve , cocks, air brake cylinders with aluminium dome covers, shoe loading pads , valve face grinders, parts of x ray machine, parts of valves with / without cut copper tubes , parts of master controllers / boilers / flushing cistern / fire extinguishers , bearing for blower end with trilobe , insulators with terminals , sm slides, broken bearing, control shafts with brass bushes, ekt / rkt, covers of battery chargers with rectifiers and heat sinks, fabricated pipe couplers, pipes, pipe fittings, part of boiler, support of magnet valves, cylinder of rail welding equipment, air reservoir, parts of test equipments, hydraulic pump, lock covers of ticket printers, covers of electrical equipments, fuse distribution boards, screem wipers, pressure switches, fuel pump levers, terminal blocks / boards, supports of contact carriers, parts of pantographs, locks, chutes, welding holders, petromax lights, motor reducer gear set, frame of intercooler, accummulators , magnet valve coil units, gear sets, hydrauliuc jacks , stainless steel vessel, capacitor banks, panels with terminals, filters, ac compressors , yokes of small electrical machines and other diesel / c & w / signal / general components, full / part with copper / brass / stainless steel with / without aluminium, wooden, fibre / plastic / wires / cables / steel / plywood / epoxy / mica and other attachments. as is where is condition.note: 1 ) cssd / goc electronic weigh bridge to be used for weighment. 2 ) loading by crane is permitted....
40319437 tender for supply of fire extinguishers...
40313983 supply of bov supply and delivery of ( 4 nos ) battery operated vehicle sealed lead acid battery at mulanur town panchayat , 1 battery operated vehicles having 3 wheels design vehicles having 3 wheels should be robust in construction for and carrying of collected municipal solid waste. 2 chassis construction ladder type welded construction consisting of two symmetrical beams / rails / channels running the length of the cart with transverse cross members connecting them fabricated using crc ms square pipes of suitable size with anti rust proof powder coating 3 dimensions of cart overall length: 2760mm + 5% tolerance overall width : 1000mm + 5% tolerance 4 motor brushless dc motor 1500w / 60v original 5 transmission single central axis differential drive with both forward and reverse direction 6 ground clearance 160 mm to 170mm 7 pay load not less than 375 kgs 8 range per charge 80 100 km per charge 9 speed of vehicle maximum 25 kms per hour 10 rear cargo box size ( lxbxh ) a ) .dimension : not less than1400mm x 1000mm x 450mm ( lx b x h ) b ) should be fabricated using ms sheet, ms square pipes of suitable thickness and sizec ) .rear door : foldable single door arrangementd ) side door foldable single door arrangement e ) both side doors should be made of m.s sheet of thickness not less than 0.6 mmf ) flooring should be made of m.s sheet of thickness not less than 1.6 mm 11 grade ability ( climbing ability 7 degree ( minimum ) . 12 brake system double rear drum pedal type 13 wheels &tyres front: 3.75 12 ( 6pr ) 1 no. rear : 3.75 12 ( 6pr ) 2 nos. spare tyre assy. 1 no. 14 seating capacity cushioned seat to accommodate 2 person 15 cabin weather proof complete metal enclosed cabin with windscreen glass ( toughened ) for driver protection with necessary frame structure for protection from heat and rain 16 suspension front: heavy duty hydraulic shocker. rear: leaf spring with hydraulic shocker 17 charger 15 amp smps charger 18 accessories accessories :. 1 ) . head lamp, speedo meter, front & rear indicators should be provided. 2 ) fire extinguishers. 3 ) functional safety by providing circuit breaker ( mcb ) 4 ) public addressing system 5 ) gps tracking 19 battery capacity 100 ah 48 v. reputed brand sealed lead acid 20 charging duration not more than 10 hours 21 warranty for vehicles the successful bidder should provide one year warranty for vehicles including repair and replacement 22 warranty forbattery the successful bidder should provide three years warranty for sealed lead acid special condition for the first one year the operation and maintenance cost per bov shall be the responsibility of the supplier...
40312820 bids are invited for custom bid for services supply installation of cleaning agent fire extinguisher for control room at bpcl tirunelveli depot total quantity :...
40307903 supply and delivery of cesspool tanker ( suction cum jetting machine ) 6000l bs vi with chassis , vehicles having3should be robust inconstruction for and carrying of collected municipal solidwaste. , ladder typeweldedconstructionconsistingof two symmetricalbeams / rails / channelsrunningthelengthofthecart withtransverse cross membersconnectingthem fabricated using crcms squarepipes of suitablesize withantirust proofpowdercoating , overall length: 2760 mm + 5knmt toleranceoverall width1000 mm 5knmt tolerance , brushless dc motor1200w / 60v original , single central axis differential drive with both forward and reverse direction , 160 mm to 170 mm . , notlessthan 375kgs , 80 100 km per charge , maximum 25 kms per hour , a ) dimension: not less than 1400 mm x 1000 mm x 450 mm ( lxbxh ) . b ) should be fabricated using ms sheet, ms square pipes of suitable thickness and size ) . c ) reardoor: foldable single door arrangement. d ) side door foldable single door arrangement. e ) both side doors should be made of ms sheet of thickness not less than 0.6 mm f ) flooring should be made of ms sheetof thickness not less than 1.6 mm , 7 degree ( minimum ) . , doublerear drumpedal type , front: 3.75 12 ( 6pr ) 1 no. rear: 3.75 – 12 ( 6pr ) 2 nos. spare tyre assy. 1 no. , cushioned seat to accommodate2 person , weather proof complete metal enclosed cabin with windscreen glass ( toughened ) for driver protection with necessary frame structure for protection from heat and rain , front: heavy dutyhydraulic shocker.rear:leaf springwithhydraulic shocker , 10 amp smps charger , accessories: 1 ) head lamp, speedo meter, front & rear indicators should be provided. 2 ) fire extinguishers. 3 ) functional safety by providingcircuit breaker ( mcb ) 4 ) public addressingsystem 5 ) gps tracking , 48v 40ah lithium ion battery , not more than 3 hours , thesuccessful bidder should provide one year warranty for vehicles includingrepair andreplacement , the successful bidder should provide three years warranty forlithium battery , **for the first one year the operation and maintenance cost per bov shall be the responsibility of the supplier. , three wheeler lithium battery operated vehicle...
40289522 tender for work of fire extinguisher refill / refill with accessories and new items purchase ; 1 fire extinguisher refill only.new abc type dcp 06 kgs dry chemical powder. 2 new abc type dcb 09 kgs dry chemical powder. 3 abc dry chemical 25 kgs. 4 abc dry chemical 10 kgs. 5 refill with accessoriescarbon 2 ( co2 ) 22.5 kgs refill and wire braide hose and moving whell. 6 abc dry chemical 5 kgs. refill and wire braide hose. 7 new purchasecarbon 2 ( co2 ) cylinder 9 kgs. 8 abc dry chemical 10 kgs....
40273840 tender for annual maintenance contract for refilling recharing and testing of fire extinguishers in cedc central...
40263023 bids are invited for portable fire extinguishers (v2) as per is 15683:2018 (q2) , extinguisher fire defence mech foam 9 ltrs capacity (without charge) (q2) total quantity : 22...
40251014 bids are invited for supply of 4.5 kg co2 type portable fire extinguishers (q3) , supply of foam 9 ltr (gas cartridge type) portable fire extinguishers (q3) , supply of 6 kg abc stored pressure type portable fire extinguishers (q3) total quantity : 7...
40222805 tender for maintenance of fire extinguishers available at electric loco shed, arakkonam for two years...
40216820 scrap materials ( tnstc villupuram region ) disposal of condemned scrap materials , condemned scrap materials , cond i beam , cond full circle tube 10.00 x 20 w / o neck , cond bus body shell tn25n0423 , cond bus body shell tn32n4118 , cond bus body shell tn32n4182 , cond bus body shell tn25n0435 , cond bus body shell tn32n4123 , cond bus body shell tn32n4125 , cond bus body shell tn25n0420 , cond bus body shell tn21n1825 , cond bus body shell tn32n4115 , cond bus body shell tn32n4177 , cond bus body shell tn21n1824 , cond bus body shell tn23n2446 , cond bus body shell tn32n4109 , cond bus body shell tn21n1841 , cond bus body shell tn32n4113 , cond bus body shell tn32n4154 , cond luggage carrier , cond iron scrap, broken seat frame, pipe cut pieces , cond bus body shell tn25n0439 , cond bus body shell tn32n4107 , cond bus body shell tn32n4114 , cond waste air filter & d.oil filter , cond wooden scrap , cond wooden scrap , cond bus body shell tn32n4132 , cond bus body shell tn32n4153 , cond bus body shell tn32n4159 , cond bus body shell tn25n0474 , cond bus body shell tn32n4160 , cond bus body shell tn32n4152 , cond bus body shell tn23n2454 , cond bus body shell tn32n4116 , cond bus body shell tn32n4178 , cond bus body shell tn32n4180 , cond tyre buffing dust , cond tyre buffing dust , cond tyre buffing dust , cond tyre buffing dust , cond tyre buffing dust , cond tyre buffing dust , cond tyre buffing dust , cond full circle flap , cond flap cut pieces 1 tonne , cond g.i.sheet cut pieces ( old ) , cond empty paint tin ( 4 ltrs , 20 ltrs cap. ) , cond aluminium sheet, beeding cut pieces , cond two tyre curing chamber , cond hanger / shackle , cond radial tyre 10.00x20 ( burst ) , cond radial tyre 10.00x20 ( non burst ) , cond radial tyre 10.00x20 ( non burst ) , cond empty grease barrels with lid , cond empty plastic barrels ( 210 lt ) , cond empty steel oil barrels ( 210 ltrs ) , cond radial tyre 7.50 x 16 ( non burst ) , cond tube light fitting with inverter , cond empty paint tin ( 4 ltrs , 20 ltrs cap. ) , cond. fire extinguisher , cond iron dust , cond hub ( front & rear ) , cond radiator core and inter cooler ( aluminium ) , cond rear brake shoe , cond front brake shoe , cond crank shaft , cond rear brake chamber , cond 12v battery 21 plates , cond. 12v 25p 180ah battery , cond axle shaft , cond crown carrier assembly , cond gear box assembly , cond cylinder head assembly , cond engine block , cond fly wheel assy leyland , cond engine assembly , cond steering box , cond hydraulic bottle jack , cond. automizer , cond fuel pump assembly , cond. capacitor ( kvar20 1, 10 2, 2 2, 1 2=7 ) , cond connecting rod , cond submersible motor , cond lop items ( gold thaali 1 no ) ( 2 grams ) , cond 24v s.s.armature , cond 1 / 2 drilling m / c , cond. sewing machine without stand , cond. pull and push rod , cond rotor , cond bearing & cone scraps...
40198094 bids are invited for backpack leaf air blower (q3) , handheld brush cutter (q3) , power chain saw (q3) , mist blower with 10kg powder (q3) , shovel (q3) , fire rake (q3) , fire beaters (q3) , fire retardant suit (q3) , safety shoes for firefighting (q3) , first aid kit (q3) , rescue rope (q3) , climbing belt (q3) , flood torch (q3) , head torch (lamp) with additional set of batteries (q3) , stretcher (q3) , customized backpack (q3) , face mask cum protective gear (q3) , night vision goggles (q3) , oxygen cylinder (2kg) (q3) , portable fire extinguisher (1kg) (q3) , flare for emergency signal (q3) total quantity : 4679...
40192577 tender for provision of 1 mw proof top solar power generation system under ge af sulur; 2 material and labour for designing , installing , testing , synchronization and commissioning of 1 mwpon grid solar roof top solar power generation system comprising of the following: bis certified andmnre almm regisitered, dcr mono crystalline perchalf cutcells solar pv module / panelssuitable for installation on roof tops with each panel having capacity not less than 540 wpcomplete with poly carbonate junction boxes, having sufficient number of fused incomers and outgoing terminals ( positive / negative ) suitable for 6 ssqmm cables and connecting cables not less than 2.5 sqmm copper conductor multistranded ( solar cross linked poly olefin cables double insulated , uv resistant halogen free low smoke ) from panel to panel all as specified and directed.all modules will have minimum 25 years oem linear output warranty. ( a ) output power ( pmax ) 540wp or above. ( b ) module efficiency: not less than 90%c ) number of cells: 72 nos ( d ) maximum system voltage : 1500 vdc ( e ) application class a ( f ) fire class a ( g ) junction box: ip 67, 1.5 kv 1000 mm length cable. ( h ) type of pv cell: mono crystalline silicon ( i ) module glass transmission shall be > 93 % ( j ) glass thickness shall be min 3.2 mm ( k ) each pv module used in any solar power project must use a rf identification tag ( l ) bypass diode for optimizing pv out to be incorporated in each solar module ( m ) module output: mc electronic plug ( n ) modules only with same rating and manufacturer shall be connected. ( o ) solar module must have iv curve test report in nabl lab for the speciifed wattage ( p ) design including civil / electrical infrastructure metricularly carried out by contractor as per the required output plant ( 1 mw ) and duly vetted from govt approved authority of nit / iit and approval by garrison engineer before execution at site. 3 ( i ) module mounting structure: design, supply and install prefabricated roof top solar panel mounting structure made of hot deep galvanized steelangles / channels / flats including nuts / bolts and washers suitable for wind resistance upto 160 mph including necessarypcc foundations of grade type b1 1:2:4 using 20 mm graded stone aggregateat suitable points to provide for a stable robust support all as directed at site all as specified and directed including designing of suitable mounting structure for spv module and shall be provided as per design cretirea considering live load, dead load, wind load and as per condition of roof slabs / foundation of existing bldgs etc by a approved structural engineer and vetted by nit / iit and approval by garrison engineer before execution at site.a ) structures shall be of flat plate design using minimum size of c ( 75 x 40 x 5mm ) or l ( 55 x 55 x 5mm ) or i ( 60x 40x 4mm ) sections or higher dimensions for respective sections.b ) each structure with fixed tilt should have a tilt angle as per the site conditions to take maximum insolation which will be approximately equal to the latitude of the location facing true south with a north south orientation.c ) the pv module mounting structure shall have a capacity to withstand a wind velocity of 160 mph unless specified for dedicated requirementsd ) the materials used for structures shall be hot dip galvanized mild steel conformed to is 2062:1992.e ) the minimum thickness of galvanization for hot dip galvanized mild steel should be at least 80 microns as per is 4759.f ) the bolts, nuts, fasteners, and clamps used for panel mounting shall be of stainless steel ss grade.g ) additional structures / frames for required for the installation of modules if any need to be provided by the contractor.h ) the structures shall be designed to allow easy replacement of any module, repairing and cleaning of any module.i ) the structure shall be designed to withstand operating environmental conditions for a period of minimum 25 years. and shall be free from corrosion while installation.j ) minimum distance between the lower level of pv module and the ground shall be 0.5m from the ground level.k ) the structures should be suitably loaded with reinforced concrete blocks of appropriate weight made out of m25 concrete mixture.l ) photovoltaic must be mounted on a stable, durable structure that can support the array and withstand wind, rain, and other adverse conditions. the modules will be fixed on structures with fixed arrangement. ( m ) 100% indigenous company 4 special note : ( 1 ) the work involves provision of roof top panels inall maint support group complex ( msg ) buildings, contractor should visit the site before quoting the tender. ( 2 ) suitability for grid connected system. ( 3 ) pv modules & solar cells shall be made in india andmakes and manufacture by india only. the contractor shall submit all required documents . the panel should be of latest edition. ( 4 ) power warranty 10 year warranty on 90% of the design output and 25 years warranty on 80% of the design output as per mnre almm registerd. . ( 5 ) tangedco registration fees, all the fees related to commissioning should be borne by the contractor. ( 6 ) work shall be executed as per tangedco & ceig norms. ( 7 ) all materials makes shall be approved as per mnre, tangedco. ( 8 ) contractor should have valid teda empanelment cerificate. ( 9 ) no drilling is allowed on the roof slabs. existing structures shall not be damaged, if any damage shall be rectified by contractor without any extra cost as orginal as directed by engineer in charge. ( 10 ) each pv module must have rfio tag wich contain name of manufacture of pv module, solar cells& month and year of manufacturing, i v curve for module, peak voltage, im , vm, ff, unique serial no, name of test lab issued iec. ( 11 ) liaisoning with tangedco authority for obtaining any relevent documents / approved of installation solar power plant to grid from tangedco for smooth functioning shall be contractor responsibility. ( 12 ) feasiblity clearence from state electricity board: rate quoted by bidder is inclusive charges for feasbility clearense and liaison work regarding the plant from starting to commissioning with tangedco will be done by the contractor and plant will be taken over after it is fully functional inculding installation of energy reading meterand certificed by tangedco. ( 13 ) standby supply shall be provided by contractor without any extra cost to department at the time of synchronizing with existing 11 kv sytem. ( 14 ) technical feasiblity report shall be obtained from tangedco before starting work in ground. ( 15 ) capacity of invertor shall be as per design creteria and approved by garrison engineer. ( 16 ) string inverters only to be use for this project. ( 17 ) solar meter and bi directional meter : supply ht net meter / bi directional meter and solar meter to deposit to tangedco for testing and caliberation thereafter taken back to site for instalation. contractor will not be claim extra cost from department for carried out of above said process. ( 18 ) spv panels and on grid inverter should be in same oem. ( 19 ) the bidder shall carefully desgin and accommodate requisite numbers of the moudules in each buildings to get the design output as per topography. also ensure sufficient circulation / movement area on the roof top for the maintenance and cleaning purposeall arround. ( 20 ) neccessary parafet wall may be ensured o each building gor the proctection of men ( 21 ) contractor shall maintain the solar plant by employing 2 well experianced technician in handling spv for 24 hrs upto 2 years from the date of completion of work . the necessary labour wages etc and included in quoted rate. 5 inspection of tangedco electrical inspector: rate quoted by bidder is inclusive electrical inspectorates inspection charges to state electricity department by sr electrical inspector. contractor is bound to arrange all the documents / inspection reports / test sheets in prescribed format by tangedco on their official website & pay charges for inspection after successfully installation of the solar power generation systems. no extra payment will be made in this effects.note : after successfully installation of system, contractor will submit inspection reports duly signed by chief electrical inspector of tangedco to mes for buyback agreement with tangedco. if the power will not generated at a correct level / limit , a penalty will be charged against contractor as decided by accepting officer 6 general notes : the items of work mentioned in item above of this schedule shall be executed as per following: ( a ) the above item shall be quoted and executed on roof top based on contractor’s own design on performance guarantee basis. the performance guarantee is related to achieving the 1 mwp generation with specified efficiency and efficacies. the contractor shall also be responsible for desired operational efficiency and desired efficacies of the system during its life cycle of minimum 25 years. ( b ) the design shall be got vetted from any one of the following agencies ( approved agencies ) : ( i ) national institute of solar energy ( nise ) . ( ii ) sardar swarn singh national institute of renewable energy ( iii ) solar energy corporation of india ( seci ) . ( iv ) the indian renewable energy development agency ( c ) the successful contractor shall submit the following document duly vetted by any one of the approved agency, within four weeks of placement of work order for approval of accepting officer. ( i ) design calculations : the tenderer should work out design based on the conditions prevalent at air force station trivandrum ground situation and site conditions as existing. ( ii ) this shall be self contained and self explanatory representation of layout of equipments and sub system. the dimensioned drawing of the site of work clearly marked with all subsystems components etc shall be submitted. ( iii ) schematic diagram of the electrical system: this shall contain specifications, sizes, current, voltage and fault levels rating of all cables, switch gears and instrumentation & control systems and all metering and interlocking etc. ( iv ) the installed capacity of pv panels shall be 10% more than the planned capacity keeping view of losses. ( v ) all the documents / technical details mentioned above duly vetted as specified above shall be approved by accepting officer before placing final order. the ge may approve the document with concurrence of accepting officer as submitted by contractor or may suggest modification / alteration in documents / technical specifications duly supported with reasons for the same. the work shall be executed based on the approval. ( vi ) the design drawings and other technical details submitted by the successful contractor, along with all calculations, drawings, technical write ups etc shall become department property. department may use these subsequently as deemed necessary. the contractor shall have no claim on these document and their subsequent use by the department. ( d ) during execution the contractor must engage experienced engineer in the same field for supervision, monitoring and execution. the contractorshall certify that execution of the work has been done satisfactorily.the contractor shall certify that the work has been executed in accordance with vetted and approved design. all cost and charges for engagement of consultant shall be born by the contractor. ( e ) department will give completion of the work to the contractor only on the basis of basis of completion report submitted by the consultant engaged by the contractor for design. ( f ) after execution of project the contractors will verify generation of electricity as per vetted design in the pvsyst / pvsol report submitted and connection of the same with existing power supply network. ( g ) the contractor shall ensure suitable arrangement for solar pv panels. 7 design , supply , install testing and commissioning of data logger with online monitoring portal all as specified and directed with the following features: .a ) solar irradiance: a pyranometer / solar cell based irradiation sensor ( along with calibration certificate ) shall be provided, with the sensor mounted in the plane of the array.b ) temperature: integrated temp, sensors for measuring the module surface temp., inverter inside enclosure temp, and ambient temp to be provided complete with readouts integrated with the data logging system. ( c ) it is recommended that the following important parameters shall be accessible through the data logging facility.i ) ac voltageii ) ac output currentiii ) output poweriv ) energy in kwhv ) dc input voltagevi ) dc input currentvii ) temperatures ( c ) viii ) invertor statusix ) irradiationx ) module temperaturexi ) string voltage & current ( d ) all communication and control cables as per the design. ( e ) contractor shall install one pc ( latest configurations ) with printer and other requireed accessories to monitor real time solar data at a designated place as directed by ge. 8 design , supply, install , testing and commisioning bis cerified and bis approved ip65 rated on grid inverter suitable output for 1 mw, natural cooled, suitable for ambient temperature range 0 to 60 deg celsius, 50 / 60 hertz frequency, with anti islanding features, havingthree phase ac output with inbuilt surge protection devices, anti reverse power controller, fuse protection, dc / ac switches, lcd display for generating data, wifi / gprs data logger, multiple mppt for optimum generation, wide input voltage range all as specified and directed by engineer in charge.note: the on grid inverter minimum qty of 05 nos or morethan is considered in quoted rate as per design. 9 minimum requirement and specification for on grid inverter: ( a ) for initializing the inverters from the sleep mode, it is important that there is sufficient sunlight and that the utility grid is available. sufficient sunlight in the morning is needed to provide adequate power to the inverter so that it could start up from the over night sleep mode. availability of the grid is required to the inverter as it has been programmed to a logic and a pre set window of grid voltage and frequency. if the available grid has all these qualities for which the inverter is designed, it would initialize the main out put contactor and couple with the grid and start evacuating the power to the grid it is coupled with. in case the grid fails due to any reason, the inverter should come to idle mode till the grid comes back again. even during the power evacuation, if the sun light falls below the desired limit, due to clouds etc., the inverter also stops working, although the grid is available, till it starts getting the desired solar power required to power the inverter it self. ( b ) if the power evacuation goes on till the evening the inverter should keep on getting the desired solar power which is in excess of the power needed to operate the inverter itself. as soon as it attains the power which is just sufficient to run the inverter, the power evacuation stops and only the inverter keeps running till the power drops further low due to decreasing sunlight in the evening, resulting in the inverter going to sleep mode to initialize again automatically the next morning. ( c ) a record shall be maintained with input from inverter in the event of failure of the utility grid resulting in inverter going to sleep mode and stop generating power. ( d ) the pcu / inverters should be tested from the mnre approved test centros / nabl / bis / iec accredited testing calibration laboratories.+c50:c59c50:c61c50:c62c50:c61c50:c60c55c50:c57c50:c59c50:c60c50:c61 ( e ) inverter manfacturer should supplied and installed minimum of 10 mw cumulative capacity of inverter in last 5 years in india ( f ) minimum efficiency 98.5%. ( g ) the dc to ac ratio of 1.25 is to be maintained at all sites. ( for eg. – for dc capacity of 100 kwp, the ac capacity of minimum 80 kw is to be maintained ) . ( h ) the pcu shall have a higher degree of ingress protection of ip 65 to handle robust environment conditions from dust and water ingress under complete outdoor installations. ( i ) the data logger should possess the feature of extracting the data externally with open protocols like modbus tcp / rtu. the manufacturer should provide the modbus register mapping file to utilise this feature ( j ) specifications: ( i ) nominal voltage 230v / 415v ( ii ) voltage band between 80% and 110% of v nominal, pollution degree iv ( ii ) nominal frequency 50 hz saftey class ( iv ) operating frequency range 47.5 to 50.5 hz ( v ) waveform pure sine wave ( vi ) harmonics ac side total harmonic current distortion < 3% 10 minimum requirement and specification for on grid inverter ( contd / ... ) : ( vii ) ripple dc voltage ripple content shall be not more than 1% ( viii ) casing protection levels degree of protection: min ip 65 ( ix ) operating ambient temp range: 10 to + 60 degree celsius ( x ) rh : 0 100% non condesing ( k ) protections: ( i ) reverse polority protection ( ii ) over voltage: both input and output ( iii ) over current: both input and output ( iv ) over / under grid frequency ( v ) over temperature ( vi ) short circuit ( vii ) lightning ( viii ) surge voltage induced at output due to external source ( ix ) islanding ( x ) ingress protection ip 65 ( l ) communication interface : rs485 / rs232 / wi fi ( with or without usb ) ( m ) synchronization: photovoltaic system must be equipped with a grid frequency synchronization device, if the system is using synchronizer inherently built in to the inverter then no separate synchronizer is required ( n ) dc injection: photovoltaic system shall not inject dc current greater than 0.5% of full rated output at the interconnection point or 1% rated inverter output current into distribution system under any operating conditions. ( o ) power factor: while the output of the inverter is greater than 50%, a lagging power factor greater than 0.9 shall be maintained. 11 supply, installation, testing and commissioning dc distribution boards ( arrey junction box ) , ip 65, suitable for roof top solar generation systemof rating upto 250 kw, 1500 volts, 8 incomer and 8 outgoing with dc surge protection device 1500 v , dc fuse 30 a 8 nosand mcbs for eight string network. the db will be having terminals suitable for 4 / 6 sqmm copper conductor cables and the enclosure for the db shall be made of frp / abs with ip65 / 66 protection all as specified and directed by engineer in charge . note : ( i ) dc panel should be equipped with an adequate capacity, dc circuit breaker along with control circuit, protection relays, fuses. ( ii ) dcdb shall have sheet from enclosure of dust and vermin proof, the busbar / cables are to be made of copper of desired size. dcdb shall be fabricated to comply with ip 65 protection. 12 supply , installation, testing and commissioning acdc breaker, outdoor type, ip 65 protectedwith following specifications: breaker 415v, 4p, 400 amp mccb 1 no ( outgoing to lt panel ) ryb indicator lamps double compression glands for inputs, double compression glands for output enclosure crca powder coated pu paint all input and output lugs ( cu & al lugs as per cable type ) 13 desgin, fabrication , supply , installation, and commissioning outdoor type solar power isolation lt panel double door ( cpri approved ) ip65 made of powder coated crca sheet steel 3.15 mm with necessary floor mounted ms channel frame made of 100x100x10 mm duly painted with one coat of primer and two coats of synthetic paint including necessary pcc foundation. the panel board shall have the following switchgear enclosed within : ( a ) aduijstial thermal and fixed magnetic setting typemccb 4 pole, 400 amps, 36 ka rating – 05 nos ( as incoming from ac breakers ) b ) aluminium busbars tpn 415 volt, 2500 amps ratingc ) elecric draw out acb 4 pole, 50 ka 2500 ampsrating – 02 nos ( as outgoing ) ( 01 main and 01 spare ) lt, air circuit breaker, operational voltage 660 voilt, insulation voltage 1000 volt, ac, 50 cycles, 3 phase, ., 4 pole, electrical draw type, rated current rating 2500 amps and of breaking capacity 50 kaw with quick make, quick break, with auto / manual operating mechanisum, microprocessor based over current stop less release and static trip release, adjustable shourt circuit release, earth fault realese with shunt trip with indiction under voltage release and wired for indicating trip healthy circuit ancillarey switch etc complet over load release rating 2500 ampd ) energy meter for measuring solar energy output with cts and pt basede ) cable glands for armoured lt cablesf ) surge protection device , 4 pole type i and type ii of capacity , iimp 8 ka / pole max 32ka ( g ) muliti function microprocesscor based meter 01 nos 14 ( h ) led type pilot indicuter lamps ryb phases with back up fuses, set of three 01 set ( i ) the lt panel board shall be kept 450 mm above ground level, mounted by means of suitable bolts amd nuts grounted into paltform of pcc 1:3:6 type c1, using 20 mmm graded stone aggregate, over pcc foundation of 100mm thickness in pcc 1:4:8 type d2 using 40mm graded stone aggregate, the exposed brick / concert surface shall be remndered in cm 1:4, 10 mm thick, finished fair and even and applied white wash three coats. ( j ) ammeter digital type 0 2500 amps with current trasformer of suitable capacity and selector switch 01 set ( k ) voltmeter digital type 0 500 volt with selector switch 01 set 15 supply, installation, testing and commissioning of ht panel with vacuum circuit breaker panel board, factory made, outdoor type, metal clad, totally enclosed, free standing floor mounting type ht 11 kv, 3 phase, 4 wire, 50 cycles, ac supply system suitable for housing trolley mounted vacuum circuit breaker, horizontal isolation and horizontal draw out type, cubicle fabricated out of crca sheet 3.15 mm thick weather, dust and vermin proof, epoxy powder coated, of ip 65 protection class of is 2147 with self contained air insulated compartments for bus bars and cable boxes with necessary supports and 350 mva, 800 amp rated aluminium bus bar including cable galleries, interconnecting bus bar connection / linkage, suitable for housing and including provision of the following switch gears including all pre wiring with pvc copper conductor cable of suitable size, nuts, bolts and washers and in accordance with is 13947 ( part 1 ) 1993 & is 8623 and all as specified and directed by engineer in charge. 16 item no. 8 shall comprise the following: a. fixed spout insulators effectively covered by safety shutters which automatically open / close during draw in / draw out operations.b. phase epoxy base isolating spout assemblies complete with isolating contacts and a pair of automatic safety shutter with indivudual locking system in closed position for earthing / maintenance purpose.c. an epoxy interrupter per phase all as per manufacturer design.d. instrumentation panel shall comprise the following: ( 1 ) microprocessor based 2 element over current and 1 element earth fault and high set ( 2 ) idmt relay 01 no, master trip relay 01 no.digital type frequency meter. ( 3 ) digital type ammeter ( 0 200 amps ) with selector switches. ( 4 ) resin cast current transformers, 11 kv, ratio 200 / 100, 5 amp, 15 va burden, class 1 accuracy for metering and 15 va / 5p 10 for protection 03 nos. ( 5 ) digital type voltmeter ( 0 15 kv ) with selector switches. ( 6 ) electrical closing coil 24 volt dc operated 01 set 17 supply, installation, testing and comissioning of step up transformer out door suitable for plinth mounting complete with standard accessories or fittings suitable for inverter voltage / 11 kv ( at no load ) ac, 3 phase, 50 cycles, 4wire, capacity 1250 kva double copper wound, immersed c r go core typenaturely coled, built up with class a insulation conforming is 1180 ( part 1 ) 2014 ( level iii ) including amendments as an the date of receipt of tender withfollowing requirement: ( a ) contionus rating : 1250 kva ( b ) no load voltage ration : 433 / 11kv ( c ) taping on hv ) + / 7.5%, + / 5%. + / 2.5 % ( d ) phase and frequency : 3 phase & 50 hz ( e ) vector group: as per design ( f ) cooling: onan ( g ) type : outdoorh ) terminal amangement: hv side: quadfurcating cable box with 03 nos bushing type terminal for connecting ht xlpe cable and 01 no for earthinglvside: bus duct ( i ) first filling of new and unused conforming to is 335 1993 ( fourth revision ) shall be marked, filtered and tested upto 50 kv di electric strength at 2.5mm air gap between testing electrodes 18 item no.9 contd / : ( j ) fittings: ( i ) extermally hand operated off circuit tap switch with position indicator and locking arrangement device. ( ii ) conservator with oil gauge, filling hole with plug and drain hole with plug. ( iii ) undercarriage with four plain rollers. ( iv ) lifting lugs for core. ( v ) earthing terminals. ( vi ) 150mm oil temperature indicator with alarm and trip contacts, ( vii ) 150mm winding temperature indicator with alarm and trip contacts. ( viii ) octc ( off circuit tap changer ) ( ix ) buchholtz relay 01 no. ( x ) top filter valve with plug. ( xi ) rating plate with diagram plate. ( xii ) lifting lugs for transformer. ( xiii ) oil filling hole cum air release plug. ( xiv ) drain valve cum sampling valve. thermometer pockets. ( xv ) silica breather. ( xvi ) marshalling box with double window. 19 supply, fixing, testing and commissioning uv protected xlpe / xlpo solar grade copper cable of size, pvc insulated1 core 4 sqmm with dc connectors ( male & female ) pair mc4, 1.5 kv volts rated all as specified and direcetd by engineer in charge. 20 supply, fixing, testing and commissioning uv protected xlpe / xlpo solar grade copper cable of size, pvc insulated1 core 6 sqmm with dc connectors ( male & female ) pair mc4, 1.5 kv volts rated all as specified and direcetd by engineer in charge. 21 supply and laying high density polyethylene pipes 50 mm dia ( hdpe ) of pressure rating 6 kgf / cm2 fixed complete to walls, ceilings or in floors etc 22 supply and fixing trunking gi cable tray of size 150 mm width, 50mm height, thickness 2mm with cover of size 155mmwidth, 12mm height, 2mm thickness and accessories ( any type of joint and bends ) with fittings ( channel, fasteners, anchor bolt ) complete all as specified and directed. 23 supply, laying, testing and commissioning cable xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area of size 300 sq mm 3.5core with consumables like lugs, ferrules, cable ties, upvc tape, upvc saddle, cable clips etc.complete all as specified and directed. 24 supply, laying, testing and commissioning cable xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area of size 1000 sq mm single core hlogaen free with consumables like lugs, ferrules, cable ties, upvc tape, upvc saddle, cable clips etc.complete all as specified and directed. 25 supply, laying, testing and commissioning cable xlpe insulated , screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 11000 volts grade with stranded aluminium conductor of size 185 sqmm , 3 core core and with consumablescomplete all as specified and directed. 26 supply and laying of aluminium bus duct from lt panel to transformer as per the current rating of lt panel and tangedco specificationcomplete all as specified and directed. 27 material and labour earthing withgiearth plate electrode ofsize 60x60cmx6mm thick buried directly in ground to a depth not less than 2.25mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to gi strip of size 32 x 6 mm as earthing lead by means of nuts, bolts and washers of steel after welding of gi strip to earth electrode to the full length of earth plate, gi medium grade pipe 40 mm bore protection pipe upto test point, 20mm dia gi light grade watering pipe with funnel and wire mesh, rcc pit cover of size 300x300x40mm reinforced with xpm having weight not less than 4kg / sqmm including 6mm thick ms bar handle made to shape, pcc pit with 1:3:6 type c1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, earth work in any type of soil, all as required at site complete all as specified in plate no 3 of ssr part i and all as specified orindicatedincludingtesting on completion. 28 earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6 mm galvanised iron strip , strip will be fixed by epoxy insulators without making hole at the distance of 60 cm from each othercomplete all as specified and directed. note earth strip shall be connected by welding only. 29 material and labour for air termination rods with 40mm light grade pipe 1.5meters long, with 300 mm long, 6mm dia copper rod clamped at one end and base of pipe embedded in pcc foundation of grade 1:3:6 of 20 mm grade aggregate on roof slabcomplete all as specified and directed. 30 test point terminal block made of gun metal or phosphor bronze size 75mmx75mmx 25 mm drilled and scewed including 3 nos 8 mm dia 25 mm long hexagonal head screws complete all as specified and as directed. 31 excavation in trenches not exc 1.5 m wide and not exc 1.5 min depth for laying of ug cableand getting out in hard soilcomplete all as specified and directed.note excavation shall be done by manual process. 32 returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of exacavated soilcomplete all as specified and directed. 33 removing excavated material to a distance not exc 50 m and deposited where as directed at a level not exc 1.5 m above the starting pointcomplete all as specified and directed. 34 supplying and laying un reinforced precast concrete cable cover, class lv, type 1, isi marked, factory manufactured, size 250 mm x 150mm x 40mm complete all as specified and directed. 35 supply and spread natural riddled soil in trenches for cushioning and covering to cable complete all as specified and directed.note: ( i ) naturalsoil shall be riddled by using sieve to separate composite particles etc as per is and refilling in trenches before laying of cable 8 cm and 15cm after laying of cable. this is then gently punned down to a depth of 10cm above the top of upper most cable. ( ii ) for the purpose of measurement only punned thickness only will be considered for payment. 36 supply and laying high density polyethylene pipes ( hdpe ) of 32 mm dia pressure rating 6 kgf / cm2 laid in trenches and fixed on polescomplete all as specified and directed. 37 material and labour cable jointing kit for 11 kv ( earthed ) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 120 sqmm to 185 sqmmcomplete all as specified and directed. 38 m & l for lt cable route indicator with a welded / riveted disc of 4 inch dia and engraved with cable route marker welded to angle iron 40 x 40 x4 mm thick fixed in ground with in and incl pcc 1:3:6 type c1 using 20mm graded aggregate including necessary earth work, form work etc complete all as specified and directed. 39 supply and fix fire extinguisher abc type of capacity 4 kg complete all as specified and directed. 40 supply and fix fire bucket stand with buckets 03 nos complete all as specified and directed. 41 supply and fix rubber mat of size 2 mtr x 1 mtr of thickness 2 mm, isi marked complete all as specified and directed. 42 desgin and supply of backup source for scada & internal lighting as per design ( min 5 kva with 3 hours back up ) complete all as specified and directed. 43 external water supply 44 supply and fixing of hdpe rotational moulded polyethylene water storage tanks capacity 2000 ltr ( cylindericval vertical with closed top ) hostied and fixed in positionas per isi maskedis 12701 / 1996 all as specified in ssr part icomplete all as specified and directed. 45 supply and fixing of solar module water cleaning system kit for the 1000 kw solar power plant system for complete proposed buildings. complete design ofthe cleaning systemsduly vetted by iit / nit for the approval of garrison engineer before execation at site. complete bill of material, specfication and necessary certificates if any shall be submitted by the bidder duly signedin duplicatedbefore exicution of the work.the design should comply with the following minimum requirements : ( a ) supply & fixing of spraying nozzle / sprinkler system with following specifications: material : abs ( plastic ) working angle 0 to 90 deg discharge: 5 to 7 lpm pressure: 1 kg / sq.cm to 2 kg / sq.cm qty : as per desgin ( b ) supply & fixing of automatic valve with following specifications; working medium: water motion pattern: diaphgram type electrom maganetic actuator, working pressure 0 to 10 bar working medium temperature: 0 to 85 deg c material of body: nv 66 / cf 8 / cf 8m qty : as per desgin ( c ) supply & fixing of screen filter with following specifications; maximum working pressure : 10 kg / sq.com range of water flow: 5 8 cum / hour screen cartridge: double screen 30 / 120 mesh filtration surface area: 12p sq.cm qty : as per desgin 46 item no. 36 contd / .. ( d ) supply & fixing of auto controller with following specifications; single phase smps 3a / 12vdc output control card qty : based on design ( e ) supply & fixing of submersible pump with following specifications; stator : ss 304 hp / kw : based on desgin phase : single / three rpm : 2900 current 7.5 amp qty : based on designnote : all the above are minimum essensial requirements. contractor has to submit detailed design along with layout and details of all componets and bifercation details of rates for each component considered in the quoted rates as per design. the quoted rates are deemed to be included with rates of all the components as per desing where not mensioned here in before.nothing extra will be payable on this account. 47 unplasticiscd pvc pipes ( sch 80 ) hsn code : 3917 of pressure rating 10 kgf / cm2 , class a laid in trenches of the following sizes, 48 ( a ) 110 mm dia 49 ( b ) 75 mm dia 50 ( c ) 50mm dia 51 ( d ) 40 mm dia 52 ( e ) 32 mm dia 53 supply & fix upvc ball valve, 100 mm dia 54 supply & fix upvc ball valve, 75 mm dia 55 supply and fix ppr gate valves ( brass insert ) of 50 mm bore. 56 supply and fix ppr gate valves ( brass insert ) of 40 mm bore. 57 supply and fix ppr gate valves ( brass insert ) of 32 mm bore. 58 supply and fixing of wet type submersible pressure pump capacity of 5 hp ( 1w+ 1sb ) with suitable panel board as per is 8034 / 1989 and is 9283 / 1995 suitable to pump with dry run prvententor etc. complete as per isi standered specfication 59 supply, install, testing and commissioning of outdoor type factory fabricated motor starter panel suitable for 3 phase 415v, 50hz system made out of crca sheet 3.15 mm with suitable neoprene rubber gasket to make it completely, dust and vermin proof, front openable type alongwith locking arrangement having angle iron base frame and legs of suitable size, pcc ( 1:3:6 ) bedding for grouting of base including dismantling and taking out old unserviceable panel, complete all as specified and directed. the panel shall comprise the following accessories and specifications : ( a ) mccb 4 pole, 63 amps, 16 ka 01 no ( incoming ) ( b ) dolstarter suitable for 5 hp centrufugal pump set incl timer 02 set ( c ) motor protection relay 01 set ( d ) single phase preventor 01 set ( e ) phase indicating led lamps ryb 01 set ( f ) panel mounted multifunction meter including cts of suitable ratio 01 set ( g ) on / off push button alongwith indication light 01 set ( h ) electrolytic high conductivity insulated copper bus bar of suitable capacity 01 set ( j ) pump 1 & 2 selector switch ( k ) auto mannual selector switch 01 no ( i ) earthing terminals 02 nos 60 s&f of 80 mm nrv for water pipe line type swing type flange end bolted cover moc ci complete all as specified and directed. 61 s&f of pressure gauge 4 dial ss glycerine;type diaphragm;complete all as specified and directed. 62 supply, laying and testing xlpe insulated screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3.5 corecomplete all as specified and directed. 63 construction of valve chamber of followinginternal size suitable for sluice valve, with 150 mm thick pcc 1:4:8, type d2, using 40mm graded aggregate for foundation, 200 mm thick brickwork with old size fly ash bricks in cement mortar 1:6, 40 mm thick pcc, 1:2:4, type b1, using 20mm graded aggregate coping, rendering in cm 1:4, 15 mm thick including provision of mild steel sheet cover 3 mm thick with 40 x 40 x 6 mm size angle iron frame work embedded in concrete with suitable hinges and locking arrangements including two coat of synthetic enamel black paint over a coat of red oxide zinc chrome primer to steel surfaces and includingnecessary earth work excavation in any type of soil etc., removal of surplus soil off the premises complete all as specified. ( a ) 900x 900 x 900mm type c 64 ( b ) 600 x 600 x 600 mm type b 65 external electric supply 66 s&f 6 sqmm multistranded copper conductor, 3 core pvc insulated and sheathed copper screen protected 1100 volts grade submersible flat cable fixed to column pipes with suitable clamps &jointing material complete including disconnecting & taking out old unserviceable cablecomplete all as specified and directed. 67 material and labour cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shapeor size as indicated or directed and incluse of one primer coad, one under coat and one finhing coat of paint all as specified and directed by engineer in charge. 68 supply and fixing 80 watts led floodlight with fittings on the roof of solar module installed floorscomplete all as specified and directed. 69 point wiring complete with 1.5 sqmm single core pvc insulated frls unsheathed cable 1100 volts grade with multi stranded copper conductor drawn thr including non metallic rigid pvc conduit with all conduit accessories not less than 20mm dia ( concealed ) and including provision of 1.5 sqmm pvc insulat unsheathed cable frls as earth continuity conductor, metal flush box and white cover plate with frame for suitable number of modules flush mo concealed in walls with suitable screws for housing the switches, socket outlets, fan regulators etc, complete all as specified and as directed. 70 switch piano, one way, 6 amps, for one module complete all as specified and as directed. 71 supply and lay gi pipe 80 mm bore medium grade for cable protection completeall as specified and as dierced. 72 cutting existing road / pcc / drain for laying of di / gi or any typeof pipe including necessary earthwork, excavation exc 600mm depth but not exc 1mtr depth, wide 800mm including making existing surface with pcc 1:2:4 type b1 using 20mm aggregate thickness of concrete is 150mmcomplete all as specified and directed. 73 security fencing with wicket gate 74 excavating in post holes ( or similar holes ) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in hard / dense soil, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. 75 m&l for pcc 1:3:6 type c 2 using 40 mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed. 76 s & f mild steel con forming to fe 290 gde e 165 qualitya as in angle post or struts in fencing fixed independently including cutting and bending to shappe as directed, drilling holes, notching for wire, flat iron fillet for securing wire mesh etc complete all as specified and directed. 77 m&l mild steel structural framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe 290 gde e 165 complete all as specified and directed 78 s & f mild steel screw bolts ( machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or squareexc 5 cm not exceeding 10cm long and 5 to 10 mm dia complete all as specified and directed. 79 supply only chain link ms galvanised fencing wire made with 3mm dia gi wire & 100x100mm mesh size all as specifiedand directed 80 fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. 81 mild steel round bars 10 mm dia and over as in strengthening bars for chainlink fencing conforming to fe 290 gde e 165complete all as specified and directed. 82 m & l for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description exc 10 cm girth or width complete all as specified and directed. 83 m & l for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description not exc 10 cm girth or width complete all as specified and directed. 84 foot path 85 surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard / dense soicomplete all as specified and directed. 86 m&l for hard core of gauge not exc 63 mm size depositing spreading , leveling watering and well ramming with broken stone boulders / stone specifiedcomplete all as specified and directed. 87 m&l 100 mm thick pcc 1:4:8 type d 2using 40 mm graded stone aggregate as in floors surface finished cement surface all as specified and directed. 88 m&l sand filling under floor or in foundation including watering and consolidation and all as specified and directed. 89 m &lmachine pressed precast conctete interlocking paver block any shape and size confirming to is 15658 2006 of 80 mmthickness m 35grade with grey cement & pigment all as specified and directed. 90 plain cement concrete 1:3:6 type c1 using 20mm graded stone aggregate as in kerbs, coping etc including necessaty formworkcomplete all as specified and directed. 91 removing excavated soil in hard / dense soil exc 1.50 km and not exc 5.00 km out side the campus including loading and unloading etc., where responsibility regarding place of deposition and permission from all authorities etc., in this regard will be of contractor andcomplete all as specified and directed. 92 mild steel ladder 93 mild steel base plates & cleats ( chequred or plain ) channels, squred cut or notched ( ordinary and counter sunk ) forming holes for nuts and bolt or welded attachment including anchor nuts & bolts 20mm dia 400mm long ( machine made ) with hexagonal or squre heads conforming to fe 410 w ( gde e 250 ) quality a complete all as specified and as directed. 94 m&l plain cement concrete, type b2, 1:2:4 in foundation filling and mass concrete complete all as specified and directed. 95 m & l for two coats of black bituminous paintof any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth including preparation of new steel surfcaes complete all as specified and directed. 96 ug sump of capacity 20000 litres 97 provn of rcc ug sump of capacity 20000 litres complete all as specified and as directed. 98 total of schedule a...
40166769 purchase of 15 numbers of bov for solid waster management purposes at sathyamangalam municipality ; supply of cost of battery operated e cart including insurance & tax in solid waste as per the following technical specifications.battery operated vehicles having 3wheels design: vehicle having 3 wheels should be robust in construction for and carrying of collected municipal soild waste, chassis construction ladder type welded construction consisting of two symmetrical beams / rails / channels running the length of the cart with transverse cross members connection them fabricated using crc ms square pipes of suitable size with anti rust proof powder coating, dimensions of cart – overall length:2760mm + 5% tolerance overall width:1000mm + 5% tolerance, motor brushless dc motor 1500w / 60v original, transmission single central axis differential drive with both forward and reverse direction, ground clearance 160mm to 170mm, pay load not less than 375kgs, range per charge 80 100km per charge, speed of vehicle maximum 25kms per hour, rear cargo box size ( l x b x h ) – dimension: not less than 1400mm x 1000mm x 45mm ( l x b x h ) , should be fabricated using ms sheet, ms square pipes of suitable thickness and size, rear door : foldable single door arrangement, both side doors should be made of ms sheet of thickness not less than 0.6mm, flooring should be made of ms sheet of thickness not less than 1.6mm, grade ability ( climbing ability ) 7 degree ( minimum ) , brake system: double rear drum pedal type, wheels & tyres: front :3.75 – 12 ( 6pr ) – 1 no rear : 3.75 – 12 ( 6pr ) – 2 nos spare tyre assy – 1 no, seating capacity : cushioned seat to accommodate 2 person, cabin : weather proof complete metal enclosed cab in with windscreen glass ( toughened ) for driver protection with necessary frame structure for protection from heat and rain, suspension : front : heavy duty hydraulic shocker, rear : leaf spring with hydraulic shoker, rear : leaf spring with hydraulic shocker, charger : 15 amp smps charger, accessories : 1 ) head lamp, speedo meter, front & rear indicators should be provided. 2 ) fire extinguishers 3 ) functional safety by provising circuit breaker ( mcb ) 4 ) public addressing system 5 ) gps tracking , battery capacity : 100 ah – 48 v, lithium ion battery, charging duration : not more than 3 hours, warranty for vehicles: the successful bidder should provide one year warranty for vehicles including repair and replacement, warranty for lithium battery : the successful bidder should provide three years warranty for lithium battery including registration fee, road tax and insurance.etc. complete inlcuding gst...